REAR DOOR BELT MOULDING INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR DOOR REAR WINDOW FRAME LH

   Click here

2. INSTALL REAR DOOR FRONT WINDOW GUIDE SUB-ASSEMBLY LH

   Click here

3. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH

   Click here

4. INSTALL REAR DOOR GLASS RUN LH

   Click here

5. INSTALL REAR DOOR QUARTER WINDOW GLASS SUB-ASSEMBLY LH

   Click here

6. INSTALL REAR DOOR OUTSIDE MOULDING INSERT LH

   Click here

7. INSTALL REAR DOOR WINDOW FRAME MOULDING LH(REAR PILLAR SIDE)

   Click here

8. INSTALL REAR DOOR WINDOW FRAME MOULDING LH(CENTER PILLAR SIDE)

   Click here

9. INSTALL REAR DOOR BELT MOULDING SUB-ASSEMBLY LH

   Click here

10. INSTALL REAR DOOR BELT MOULDING LH

    
    

    1. 

       Install in this Direction

       Attach the guide and claw to install the rear door belt moulding LH as shown in the illustration.

    2. Remove the protective tape.

11. INSTALL REAR DOOR NO. 2 WEATHERSTRIP LH

    Click here

12. INSTALL REAR DOOR FRONT BELT MOULDING END COVER LH

    Click here

13. INSTALL REAR DOOR REAR BELT MOULDING END COVER LH

    Click here

14. INSTALL REAR DOOR SERVICE HOLE COVER LH

    Click here

15. INSTALL REAR MULTIPLEX NETWORK DOOR ECU LH

    Click here

16. INSTALL REAR DOOR GLASS INNER WEATHERSTRIP LH

    Click here

17. INSTALL REAR SIDE WINDOW COVER LH (w/ Rear Door Sunshade)

    Click here

18. INSTALL REAR CURTAIN SUB-ASSEMBLY LH (w/ Rear Door Sunshade)

    Click here

19. INSTALL CURTAIN RAIL SIDE COVER LH (w/ Rear Door Sunshade)

    Click here

20. INSTALL REAR DOOR FRAME GARNISH LH

    Click here

21. INSTALL REAR DOOR NO. 2 FRAME GARNISH LH

    Click here

22. INSTALL REAR DOOR TRIM COVER LH

    Click here

23. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

24. INSTALL REAR DOOR NO. 2 ARMREST COVER LH

    Click here

25. INSTALL REAR DOOR ARMREST COVER LH

    Click here

26. INSTALL REAR DOOR TRIM UPPER COVER LH

    Click here

27. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

28. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

29. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

30. CHECK POWER WINDOW CONTROL SYSTEM

    Click here

31. INITIALIZE REAR DOOR SUNSHADE ASSEMBLY (w/ Rear Door Sunshade)

    Click here

32. CHECK REAR DOOR SUNSHADE SYSTEM (w/ Rear Door Sunshade)

    Click here