CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
INSTALL REAR SEAT INNER BELT ASSEMBLY LH
| *a | Protruding Part |
Install the rear seat inner belt assembly LH with the bolt.
Note
Do not allow the anchor part of the rear seat inner belt assembly LH to overlap the protruding part.
Attach the wire harness clamp.
INSTALL REAR SEAT INNER BELT ASSEMBLY RH
| *a | Protruding Part |
Install the rear seat inner belt assembly RH with the bolt.
Note
Do not allow the anchor part of the rear seat inner belt assembly RH to overlap the protruding part.
Attach the wire harness clamp.
INSTALL REAR NO. 2 SEAT ADJUSTER ASSEMBLY
INSTALL REAR NO. 1 SEAT ADJUSTER ASSEMBLY
INSTALL REAR SEATBACK ASSEMBLY LH
INSTALL REAR SEATBACK ASSEMBLY RH
INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY RH
| *a | Protruding Part |
|
Nut |
|
Connector |
Install the rear center seat lap type belt assembly RH with the nut.
Note
Do not allow the anchor part of the rear center seat lap type belt assembly RH to overlap the protruding part.
Attach the clamp and connect the connector.
INSTALL REAR SEAT CUSHION LOCK HOOK
INSTALL REAR SEAT CUSHION ASSEMBLY LH
INSTALL REAR SEAT CUSHION ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
INITIALIZATION OF SEAT ECU
INSPECT SRS WARNING LIGHT
INSPECT SEAT BELT WARNING SYSTEM
w/ Occupant Classification System:
w/o Occupant Classification System:
INSPECT REAR SEAT ASSEMBLY
INSPECT SEAT HEATER SYSTEM
INSPECT CLIMATE CONTROL SEAT SYSTEM
INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)