AIR PUMP(for Rear Seat) INSTALLATION

CAUTION / NOTICE / HINT

• Wear protective gloves. Sharp areas on the parts may injure your hands.

• There is risk of injury.

PROCEDURE

1. Click here

   INSTALL LUMBER SUPPORT PUMP SUB-ASSEMBLY LH

   
   
   1. 

      *A

      w/o Refresh Seat

      *B

      w/ Refresh Seat

      Install the lumbar support pump sub-assembly LH with the 2 nuts.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

   2. Install the tube to the clamp.

      

      Note:

      Check that the tube marking is within the specified range of the clamp.

   3. 

      Attach the wire harness clamp.

   4. Connect the connector.

2. Click here

   INSTALL LUMBER SUPPORT PUMP SUB-ASSEMBLY RH

   Tip:

   Use the same procedure described for the LH side.

3. Click here

   INSTALL SEATBACK CHECK VALVE WITH BRACKET LH

   Click here

4. Click here

   INSTALL SEATBACK CHECK VALVE WITH BRACKET RH

   Tip:

   Use the same procedure described for the LH side.

5. Click here

   INSTALL NO. 2 SEATBACK CHECK VALVE WITH HOSE LH (w/ Refresh Seat)

   Click here

6. Click here

   INSTALL NO. 2 SEATBACK CHECK VALVE WITH HOSE RH (w/ Refresh Seat)

   Tip:

   Use the same procedure described for the LH side.

7. Click here

   INSTALL NO. 1 SEATBACK CHECK VALVE WITH HOSE LH (w/ Refresh Seat)

   Click here

8. Click here

   INSTALL NO. 1 SEATBACK CHECK VALVE WITH HOSE RH (w/ Refresh Seat)

   Tip:

   Use the same procedure described for the LH side.

9. Click here

   INSTALL REAR SEATBACK ASSEMBLY LH

   Click here

10. Click here

    INSTALL REAR SEATBACK ASSEMBLY RH

    Click here

11. Click here

    INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

12. Click here

    INSTALL REAR SEAT CUSHION ASSEMBLY LH

    Click here

13. Click here

    INSTALL REAR SEAT CUSHION ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.

14. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

15. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

16. Click here

    PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

17. Click here

    CHECK SRS WARNING LIGHT

    Click here

18. Click here

    INSPECT REAR SEAT ASSEMBLY

    Click here

19. Click here

    INSPECT SEAT HEATER SYSTEM

    Click here

20. Click here

    INSPECT CLIMATE CONTROL SEAT SYSTEM

    Click here

21. Click here

    INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here

22. Click here

    INSPECT SEAT BELT WARNING SYSTEM

    
    

    1. w/ Occupant Classification System:

       Click here

    2. w/o Occupant Classification System:

       Click here