REAR CONTROL SWITCH(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR POWER SEAT SWITCH

   
   

   1. 

      Attach the clamp and connect the connector.

2. INSTALL REAR CENTER SEAT ARMREST COVER

   
   

   1. 

      Install the rear seat center armrest cover.

3. INSTALL REAR CENTER SEAT ARMREST BRACKET LH

   
   

   1. 

      Install the rear seat center armrest bracket LH with the 2 screws.

4. INSTALL REAR CENTER SEAT ARMREST BRACKET RH

   
   

   1. 

      Install the rear seat center armrest bracket RH with the 2 screws.

5. INSTALL REAR POWER SEAT SWITCH WITH BRACKET

   
   

   1. 

      Install the rear power seat switch with bracket with the 4 screws.

6. INSTALL REAR CENTER NO. 2 SEAT ARMREST PANEL

   
   

   1. 

      Install in this Direction

      While moving the rear center No. 2 seat armrest panel in the direction indicated by the arrow shown in the illustration, insert the guides.

   2. Attach the clips and claws and install the rear center No. 2 seat armrest panel.

7. INSTALL REAR CENTER NO. 2 SEAT ARMREST PANEL SUB-ASSEMBLY

   
   

   1. 

      Install in this Direction

      While moving the rear center No. 2 seat armrest panel sub-assembly in the direction indicated by the arrow shown in the illustration, insert the guides.

   2. Attach the clips and claws and install the rear center No. 2 seat armrest panel sub-assembly.

8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

   Click here

10. CHECK SRS WARNING LIGHT

    Click here

11. INSPECT REAR SEAT ASSEMBLY

    Click here

12. INSPECT SEAT HEATER SYSTEM

    Click here

13. INSPECT CLIMATE CONTROL SEAT SYSTEM

    Click here

14. INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here