PRE-COLLISION SYSTEM(for Mono Camera Type), Diagnostic DTC:C1A50

DTC Code DTC Name
C1A50 Brake System Malfunction

DESCRIPTION

When the pre-collision system is operating, the driving support ECU assembly sends brake control signals to the skid control ECU assembly.

If the driving support ECU assembly receives an electronically controlled brake system malfunction signal from the skid control ECU assembly via CAN communication, DTC C1A50 will be stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1A50 Brake System Malfunction While the power switch is on (IG), the driving support ECU assembly receives an electronically controlled brake system malfunction signal from the skid control ECU assembly for 0.3 seconds or more. Electronically controlled brake system

PROCEDURE


  1. GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM


    1. Perform troubleshooting for the electronically controlled brake system.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

    END