POP UP HOOD LIFTER(for Front Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL HOOD LOCK CONTROL ASSEMBLY


    1. B004TERC01
      B004RMI Install in this Direction

      Install the hood lock control assembly.

  2. INSTALL HOOD LOCK CONTROL CABLE COVER RH (for RHD)

    Click here

  3. INSTALL HOOD LOCK ASSEMBLY

    Click here

  4. INSTALL POP UP HOOD LIFTER ASSEMBLY LH


    1. Check that the power switch is off.

    2. Check that the cable is disconnected from the negative (-) auxiliary battery terminal.

      CAUTION:


      • Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the pedestrian protection system.

      • If the pop up hood lifter deploys for any reason, it may cause a serious accident.

      B004UM0
    3. B004V7K

      Pass the pop up hood lifter assembly LH under the air conditioning hose as shown in the illustration.

    4. B004RGW

      Attach the hook to set the pop up hood lifter assembly LH.

    5. Install the 3 bolts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

    6. Connect the pop up hood lifter connector.


      1. Before connecting the connector, check that the position of the housing lock is correct as shown in the illustration.

        B004UIXC05
        *a Correct *b Incorrect
        *c CPA *d Housing
      2. B004WAVC02
        *a Housing Lock
        *b CPA
        *c CPA Upper Part
        B004RMI Connect in this Direction

        While holding the CPA be sure to engage the connectors until they are locked and check that the CPA is in its original position (when locking, make sure that a click sound can be heard).

        Note

        Do not push down the upper part of the CPA shown in the illustration when connecting the pop up hood lifter connector.

  5. INSTALL POP UP HOOD LIFTER ASSEMBLY RH


    1. Check that the power switch is off.

    2. Check that the cable is disconnected from the negative (-) auxiliary battery terminal.

      CAUTION:


      • Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the pedestrian protection system.

      • If the pop up hood lifter deploys for any reason, it may cause a serious accident.

      B004UM0
    3. B004X84C01
      B004RMI Attach Hood Lock Control Assembly Cable Clamp in this Direction
      B004T3S Connect Hood Lock Control Assembly Cable End in this Direction

      Connect the hood lock control cable end.

    4. Connect the hood lock control cable clamp.

    5. B004Y22

      Attach the hook to set the pop up hood lifter assembly RH.

    6. Install the 3 bolts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

    7. Connect the pop up hood lifter connector.


      1. Before connecting the connector, check that the position of the housing lock is correct as shown in the illustration.

        B004UIXC05
        *a Correct *b Incorrect
        *c CPA *d Housing
      2. B004WAVC02
        *a Housing Lock
        *b CPA
        *c CPA Upper Part
        B004RMI Connect in this Direction

        While holding the CPA be sure to engage the connectors until they are locked and check that the CPA is in its original position (when locking, make sure that a click sound can be heard).

        Note

        Do not push down the upper part of the CPA shown in the illustration when connecting the pop up hood lifter connector.

  6. INSTALL FRONT AIRBAG SENSOR LH (for LH Side)

    Click here

  7. INSTALL FRONT AIRBAG SENSOR RH (for RH Side)

    Tech Tips

    Use the same procedure for the LH side.

  8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  10. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  11. CHECK SRS WARNING LIGHT

    Click here

  12. PERFORM SYSTEM CALIBRATION

    Click here

  13. ADJUST HEADLIGHT AIMING

    Click here