Click here

REAR SEAT SIDE AIRBAG ASSEMBLY(for Power Seat) INSTALLATION

Click here
Click here Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL REAR SEAT AIRBAG ASSEMBLY LH


    1. B004RIX

      Install the rear seat airbag assembly LH with 2 new nuts.

      5.5 N*m 56 kgf*cm 49 in.*lbf
      CAUTION:

      • Do not reuse the nut.

      • If the installation surface or surrounding area of the rear seat airbag assembly LH is deformed or damaged, replace the rear seat sub panel sub-assembly LH with a new one.

    2. Attach the claw to connect the airbag connector.

  2. Click here

    INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD LH

    Click here

  3. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  5. Click here

    PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  6. Click here

    CHECK SRS WARNING LIGHT

    Click here

  7. Click here

    PERFORM SYSTEM CALIBRATION

    Click here