Click here

HEADUP DISPLAY INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here

PROCEDURE


  1. Click here

    INSTALL HEADUP DISPLAY


    1. B004YNPC02
      B004SZX Bolt
      B004UK4 Connector

      Connect the connector.

    2. Install the headup display with the 3 bolts.

      10 N*m 102 kgf*cm 7 ft.*lbf
  2. Click here

    INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  5. Click here

    PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  6. Click here

    CHECK SRS WARNING LIGHT

    Click here

  7. Click here

    PERFORM SYSTEM CALIBRATION

    Click here