DOOR CONTROL RECEIVER INSTALLATION

PROCEDURE

1. Click here

   INSTALL ELECTRICAL KEY AND TPMS RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)

   
   

   1. Connect the 2 connectors.

   2. 

      	Nut
      	Connector

      Install the electrical key and TPMS receiver assembly with the nut.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

      Note:
      

      • Do not reuse an electrical key and TPMS receiver assembly which has been subjected to an impact or dropped.

      • 

        If the removed nut is the same shape as that shown in the illustration, replace it the supplied replacement part.

2. Click here

   INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY (w/o Tire Pressure Warning System)

   
   

   1. Connect the connector.

   2. 

      	Nut
      	Connector

      Install the smart door control receiver assembly with the nut.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

      Note:
      

      • Do not reuse a smart door control receiver assembly which has been subjected to an impact or dropped.

      • 

        If the removed nut is the same shape as that shown in the illustration, replace it the supplied replacement part.

3. Click here

   INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

   
   
   1. 

      	Install in this Direction
      	Clip
      	Grommet

      Install the luggage compartment trim cover assembly RH with the 2 clips.

   2. Install the grommet.

   3. 

      	Install in this Direction
      	Push

      Push the lever in the direction of the arrow shown in the illustration and install the rope hook.

4. Click here

   INSTALL SIDE TRIM BOX

   
   
   1. 

      Attach the guide and claw to install the side trim box.

5. Click here

   INSTALL REAR FLOOR FINISH PLATE

   Click here

6. Click here

   INSTALL ROPE HOOK ASSEMBLY

   Click here

7. Click here

   INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

8. Click here

   INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

9. Click here

   INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear Air Conditioning System)

   Click here

10. Click here

    INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Rear Air Conditioning System)

    Tip:

    Use the same procedure described for the front luggage compartment trim cover (w/o Rear Air Conditioning System).

11. Click here

    INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER

    Click here

12. Click here

    INSTALL TOOL BOX

    Click here

13. Click here

    INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

14. Click here

    INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

15. Click here

    INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

16. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

17. Click here

    LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

18. Click here

    REGISTER TRANSMITTER ID (w/ Tire Pressure Warning System)

    Click here

19. Click here

    INSPECT TIRE PRESSURE WARNING SYSTEM (w/ Tire Pressure Warning System)

    Click here

20. Click here

    PERFORM INITIALIZATION (w/ Tire Pressure Warning System)

    Click here