LUGGAGE COMPARTMENT DOOR LOCK REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the luggage door closer assembly removal/installation are shown below.

Replacement Part Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link
When the luggage compartment door is opened using a mechanical key Initialize luggage closer motor assembly The power trunk lid does not operate

Click here

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  2. REMOVE SWITCH BEZEL

    Click here

  3. REMOVE NO. 2 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  4. REMOVE LUGGAGE COMPARTMENT DOOR COVER

    Click here

  5. REMOVE LUGGAGE DOOR CLOSER ASSEMBLY


    1. B004U42C01
      *1 Luggage Door Lock Control Cable Sub-assembly

      Disconnect the connector.

    2. Detach the guide and remove the luggage door lock control cable sub-assembly.

    3. Remove the 2 bolts.

      Tech Tips

      Remove the luggage door closer assembly while supporting it with one hand.

    4. B004W8JC01
      B004RMI Remove in this Direction

      Detach the guide and remove the luggage door closer assembly in the direction indicated by the arrow shown in the illustration.