FRONT DOOR LOCK INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY LH


    1. B004XWYC01
      B004RMI Install in this Direction

      As shown in the illustration, install the front door inside locking cable assembly LH and attach the clamp.

  2. INSTALL FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH


    1. B004XDRC01
      B004RMI Install in this Direction

      Install the front door lock remote control cable assembly LH and attach the clamp as shown in the illustration.

  3. INSTALL FRONT DOOR LOCK COVER SUB-ASSEMBLY LH


    1. B004XRI

      Attach the claw.

    2. B004S13C01
      B004RMI Install in this Direction

      Attach the claw and install the front door lock cover sub-assembly LH as shown in the illustration.

  4. INSTALL FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH

    Note


    • When reusing the removed front door lock with motor assembly LH, be sure to replace the door lock wire harness seal on the connector with a new one.

    • Keep the door lock wire harness seal of the connector free from grease and dust, etc.

    • Reusing the door lock wire harness seal or using a damaged door lock wire harness seal may cause water to enter the connecting part. This may result in a malfunction of the front door lock with motor assembly LH.


    1. Apply MP grease to the sliding parts of the front door lock with motor assembly LH.

    2. B004VFX

      When reusing front door lock with motor assembly LH:


      1. Install a new door lock wire harness seal to the front door lock with motor assembly LH.

    3. B004WSIC01
      B004RMI Install in this Direction

      Insert the front door lock with motor assembly LH from the service hole in the direction indicated by the arrow shown in the illustration, and then install the front door lock with motor assembly LH with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note

      Do not damage the vehicle body with front door lock with motor assembly LH.

      Tech Tips

      Install the front door lock with motor assembly LH while supporting it with one hand.

    4. B004URNC01
      B004SZX "TORX" screws
      B004UK4 Connector

      Using a T30 "TORX" socket wrench, install the front door lock with motor assembly RH with the 2 TORX screws.

      Torque:
      7.3 N*m  { 74 kgf*cm, 65 in.*lbf }

    5. Connect the connector.

  5. INSTALL FRONT DOOR LOCK CYLINDER ASSEMBLY LH (for Driver Side)

    Click here

  6. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH (for Driver Side)

    Click here

    Click here

  7. INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY LH

    Click here

  8. INSTALL FRONT DOOR REAR WINDOW FRAME LH

    Click here

  9. INSTALL FRONT DOOR NO. 2 GLASS RUN LH

    Click here

  10. INSTALL FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY LH

    Click here

  11. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH

    Click here

  12. INSTALL FRONT DOOR FRONT WINDOW FRAME MOULDING LH

    Click here

  13. INSTALL FRONT DOOR UPPER WINDOW FRAME MOULDING LH

    Click here

  14. INSTALL FRONT DOOR FRONT GLASS RUN LH

    Click here

  15. INSTALL FRONT DOOR GLASS RUN LH

    Click here

  16. INSTALL FRONT PILLAR UPPER COVER SUB-ASSEMBLY LH

    Click here

  17. ADJUST FRONT DOOR GLASS SUB-ASSEMBLY LH

    Click here

  18. INSTALL FRONT DOOR WINDOW FRAME MOULDING LH(CENTER PILLAR SIDE)

    Click here

  19. INSTALL FRONT DOOR REAR BELT MOULDING END COVER LH

    Click here

  20. INSTALL FRONT DOOR BELT MOULDING LH

    Click here

  21. INSTALL FRONT DOOR NO. 2 WEATHERSTRIP LH

    Click here

  22. INSTALL FRONT DOOR NO. 3 WEATHERSTRIP LH

    Click here

  23. INSTALL FRONT DOOR ARMREST SET BRACKET LH

    Click here

  24. INSTALL DOOR SIDE AIRBAG SENSOR LH

    Click here

  25. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH

    Click here

  26. INSTALL FRONT MULTIPLEX NETWORK DOOR ECU LH

    Click here

  27. INSTALL OUTER MIRROR INSTALL HOLE COVER LH

    Click here

  28. INSTALL FRONT DOOR SERVICE HOLE COVER LH

    Click here

  29. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

    Click here

  30. INSTALL FRONT DOOR PANEL PROTECTOR LH

    Click here

  31. INSTALL FRONT DOOR VENT SEAL LH

    Click here

  32. INSTALL FRONT DOOR GLASS INNER WEATHERSTRIP LH

    Click here

  33. INSTALL UPPER DOOR FRAME GARNISH LH

    Click here

  34. INSTALL FRONT DOOR TRIM COVER LH

    Click here

  35. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  36. INSTALL FRONT DOOR NO. 2 ARMREST COVER LH

    Click here

  37. INSTALL FRONT DOOR ARMREST COVER LH

    Click here

  38. INSTALL FRONT DOOR TRIM UPPER COVER LH

    Click here

  39. INSPECT FITTING OF FRONT DOOR

    Click here

  40. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  41. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  42. INSPECT SRS WARNING LIGHT

    Click here

  43. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  44. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  45. CHECK POWER WINDOW CONTROL SYSTEM

    Click here

  46. CHECK POWER DOOR LOCK CONTROL SYSTEM

    Click here

  47. INSPECT OUTER REAR VIEW MIRROR OPERATION

    Click here

  48. CHECK FRONT POWER SEAT CONTROL SYSTEM

    Click here