SUB BATTERY INSTALLATION

PROCEDURE

1. Click here

   INSTALL SUB-BATTERY BRACKET

   
   

   1. Install the sub-battery bracket (positive (+) terminal side) to the sub-battery module assembly with the 2 bolts.

      for bolt A
      5.5 N*m	56 kgf*cm	49 in.*lbf
      for bolt B
      4.5 N*m	46 kgf*cm	40 in.*lbf

      Bolt Length
      Item Length (Distance from the Seat) Bolt A 10.4 mm (0.41 in.) Bolt B 8 mm (0.31 in.)

   2. Install the sub-battery bracket (negative (-) terminal side) to the sub-battery module assembly with the 2 bolts.

      for bolt A
      5.5 N*m	56 kgf*cm	49 in.*lbf
      for bolt B
      4.5 N*m	46 kgf*cm	40 in.*lbf

      Bolt Length
      Item Length (Distance from the Seat) Bolt A 10.4 mm (0.41 in.) Bolt B 8 mm (0.31 in.)

2. Click here

   INSTALL SUB-BATTERY MODULE ASSEMBLY

   
   

   1. Install the sub-battery module assembly with the 2 nuts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   2. Connect the connector to the sub-battery module assembly.

   3. Connect the 2 sub-battery terminals to the sub-battery module assembly with the 2 nuts.

      8.7 N*m

      89 kgf*cm

      77 in.*lbf

3. Click here

   INSTALL CONNECTOR COVER

   
   

   1. Attach the 2 claws and install connector cover to the sub-battery module assembly.

4. Click here

   INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET RH

   
   

   1. Attach the clip and install the rear luggage compartment tray bracket RH.

   2. Install the rope hook assembly with the bolt.

      6.5 N*m

      66 kgf*cm

      58 in.*lbf

   3. Attach the claw and close the cap.

5. Click here

   INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

   Click here

6. Click here

   INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

7. Click here

   INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

8. Click here

   INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

9. Click here

   INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER

   Click here

10. Click here

    INSTALL REAR FLOOR FINISH PLATE

    Click here

11. Click here

    INSTALL ROPE HOOK ASSEMBLY

    Click here

12. Click here

    INSTALL SIDE TRIM BOX

    Click here

13. Click here

    INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

14. Click here

    INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

15. Click here

    INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

16. Click here

    INSTALL AUXILIARY BATTERY

    Click here

17. Click here

    INSTALL TOOL BOX

    Click here

18. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

19. Click here

    INSTALL REAR COOLING UNIT ASSEMBLY (w/ Rear Cooler)

    Click here

20. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here