INTEGRATION RELAY(for Luggage Compartment) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL NO. 3 SEMICONDUCTOR POWER INTEGRATION ECU

   
   
   1. 

      Rotate in this Direction

      Attach the claw and connect the lever connector.

      Note:
      

      • Make sure the connector terminal is free from oil and grease.

      • Do not subject the No. 3 semiconductor power integration ECU to any impact.

      • Do not use a No. 3 semiconductor power integration ECU that has been dropped.

      • Do not disassemble the No. 3 semiconductor power integration ECU.

      • Be sure to connect the lever connector securely.

   2. 

      Connect the power source connector.

      Note:
      

      • Make sure the connector terminal is free from oil and grease.

      • Do not subject the No. 3 semiconductor power integration ECU to any impact.

      • Do not use a No. 3 semiconductor power integration ECU that has been dropped.

      • Do not disassemble the No. 3 semiconductor power integration ECU.

   3. 

      Align the guide and install the No. 3 semiconductor power integration ECU with the nut.

      Note:
      

      • Do not subject the No. 3 semiconductor power integration ECU to any impact.

      • Do not use a No. 3 semiconductor power integration ECU that has been dropped.

      • Do not disassemble the No. 3 semiconductor power integration ECU.

      • 

        If the removed nut is the same shape as that shown in the illustration, replace it the supplied replacement part.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

2. Click here

   INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

   Click here

3. Click here

   INSTALL REAR FLOOR FINISH PLATE

   Click here

4. Click here

   INSTALL ROPE HOOK ASSEMBLY

   Click here

5. Click here

   INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

6. Click here

   INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

7. Click here

   INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear Cooler)

   Click here

8. Click here

   INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Rear Cooler)

   Click here

9. Click here

   INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER

   Click here

10. Click here

    INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

11. Click here

    INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

12. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

13. Click here

    INSTALL TOOL BOX

    Click here

14. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here