INITIALIZATION
Note
When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| LKA/LDA system (for Mono camera type) | for Stereo Camera type: for Mono Camera type: |
| Lane control system (for Stereo camera type) | |
| Parking support brake system* | |
| Pre-collision system (for Mono camera type) | |
| Pre-collision system (for Stereo camera type) | |
| Adaptive high beam system | |
| Lighting system (EXT) Cornering lights |
|
| Variable gear ratio steering system | |
| Parking assist monitor system | |
| Panoramic view monitor system | |
| Rear door sunshade system | |
| Power trunk lid system |
*: When performing learning using the GTS.
CHARGING SYSTEM PRECAUTION
CAUTION:
Orange wire harnesses and connectors indicate high-voltage circuits. To prevent electric shock, always follow the procedure described in the repair manual.
To prevent electric shock, wear insulated gloves when working on wire harnesses and components of the high voltage system.
Note
If the auxiliary battery is fully depleted or the READY indicator does not illuminate, recharge the auxiliary battery.
Never disconnect the auxiliary battery while the power switch is on (READY).
Before giving the auxiliary battery a quick charge, disconnect the auxiliary battery cables.
Check the auxiliary battery again before the vehicle is returned to the customer.
When replacing the auxiliary battery, use a new auxiliary battery of the same dimensions with a capacity of 51 Ah or more at a 20-hour rate.