REAR CROSSING TRAFFIC ALERT BUZZER INSTALLATION

PROCEDURE

1. Click here

   INSTALL BLIND SPOT MONITOR BUZZER

   
   

   1. Connect the connector.

   2. Attach the clamp to install the blind spot monitor buzzer.

2. Click here

   INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

   
   

   1. for power seat:

      Click here

   2. for fixed seat type:

      Click here

3. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Click here

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. Click here

   INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

   Click here

5. Click here

   INSPECT SRS WARNING LIGHT

   Click here

6. Click here

   INSPECT SEAT BELT WARNING SYSTEM

   
   

   1. w/ Occupant Classification System:

      Click here

   2. w/o Occupant Classification System:

      Click here

7. Click here

   INSPECT REAR SEAT ASSEMBLY (for Power Seat)

   Click here

8. Click here

   INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

   Click here

9. Click here

   INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

   Click here

10. Click here

    INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here

11. Click here

    PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here