CAUTION / NOTICE / HINT
Note
Do not drop the front side radar sensor.
Do not drop the front side radar sensor. If it is dropped, replace it with a new one.
Tech Tips
The front side radar beam axis inspection is performed to confirm whether the sensor is transmitting radio waves.
The front side radar beam axis confirmation is performed to confirm whether the sensor's beam axis is correct, and perform adjustment of the beam axis by using reflector.
The front side radar sensor installation condition inspection is performed to confirm whether the sensor is placed vertically to the ground (+/-4.5°) by using a jig, and that the sensor is 56 to 64° from the line parallel to the vehicle center line.
PROCEDURE
INSTALL FRONT SIDE RADAR SENSOR BRACKET LH
Tech Tips
Use the same procedure described for the RH side.
| *a | Guide |
Attach the guide to temporarily install the front side radar sensor bracket LH.
Tighten the 3 bolts to install the front side radar sensor bracket LH in the order shown in the illustration.
INSTALL HEADLIGHT ASSEMBLY LH
INSTALL FRONT SIDE RADAR SENSOR
Tech Tips
Use the same procedure described for the RH side.
|
Connector |
|
Nut |
Install the front side radar sensor with new 3 nuts.
Connect the connector.
Note
Do not drop the front side radar sensor. If it is dropped, replace it with a new one.
Attach the wire harness clamp.
PERFORM FRONT SIDE RADAR SENSOR INSTALLATION CONDITION INSPECTION
INSTALL FRONT FENDER REINFORCEMENT SUB-ASSEMBLY TOP LH
INSTALL FRONT BUMPER ASSEMBLY
except Sport Package:
for Sport Package:
PERFORM DIAGNOSTIC SYSTEM CHECK
PERFORM FRONT SIDE RADAR BEAM AXIS CONFIRMATION
ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
PERFORM CALIBRATION
w/ Parking Support Brake System: