Click here

PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:U023B

Click here
Click here
DTC Code DTC Name
U023B Lost Communication with Panoramic View Monitor Control Module
Click here

DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the rear television camera assembly.

Tip:

If CAN communication system DTCs are stored, they may also be stored in other systems.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U023B Lost Communication with Panoramic View Monitor Control Module Lost Communication with Television Camera Controller CAN communication system Rear television camera assembly
Click here

PROCEDURE


  1. Click here

    CHECK DTC OUTPUT


    1. Clear the DTCs.


      1. Chassis > Parking Assist Camera > Clear DTCs


    2. Recheck for DTCs and check that no DTCs are output.


      1. Chassis > Parking Assist Camera > Trouble Codes


      Tip:

      • If CAN communication system DTCs are stored, they may also be stored in other systems.

      • If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

      • If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform troubleshooting again, even if the DTC was not output when rechecking for DTCs.

        Click here

      Result
      Result Proceed to
      No DTCs are output A
      DTCs are output B