PARKING ASSIST ECU INSTALLATION

PROCEDURE


  1. INSTALL PARKING ASSIST ECU


    1. for LHD:


      1. B004VDVC01
        *a Clamp
        *b Hook
        B004RMI Install in this Direction (1)
        B004T3S Install in this Direction (2)
        B004U7U Install in this Direction (3)

        Attach the hook to temporarily install the parking assist ECU.

      2. Attach the wire harness clamp.

      3. B004Y5P

        Install the parking assist ECU with 2 bolts.

        Torque:
        10.5 N*m  { 107 kgf*cm, 8 ft.*lbf }
      4. B004RQQ

        Connect the 3 connectors.

      5. Attach the wire harness clamp to the connector holder.

      6. Install the front floor carpet assembly front.

    2. for RHD:


      1. B004VC7C04
        *a Clamp
        *b Hook
        B004RMI Install in this Direction (1)
        B004T3S Install in this Direction (2)
        B004U7U Install in this Direction (3)

        Attach the hook to temporarily install the parking assist ECU.

      2. Attach the wire harness clamp.

      3. B004RKG

        Install the parking assist ECU with 2 bolts.

        Torque:
        10.5 N*m  { 107 kgf*cm, 8 ft.*lbf }
      4. B004W18

        Connect the 3 connectors.

      5. Attach the wire harness clamp to the connector holder.

  2. INSTALL COWL SIDE TRIM BOARD RH

    Click here

  3. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

  4. PERFORM CALIBRATION

    Click here