CLEARANCE WARNING BUZZER(for Rear Side) INSTALLATION

PROCEDURE

1. INSTALL NO. 2 CLEARANCE WARNING BUZZER

   

   
   

   1. Connect the connector.

   2. Attach the clamp to install the No. 2 clearance warning buzzer.

2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

   
   

   1. for Power Seat:

      Click here

   2. for Fixed Seat Type:

      Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

   Click here

5. INSPECT SRS WARNING LIGHT

   Click here

6. INSPECT SEAT BELT WARNING SYSTEM

   
   

   1. w/ Occupant Classification System:

      Click here

   2. w/o Occupant Classification System:

      Click here

7. INSPECT REAR SEAT ASSEMBLY (for Power Seat)

   Click here

8. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

   Click here

9. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

   Click here

10. INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here

11. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here