CLEARANCE WARNING BUZZER(for Front Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the RHD and LHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL NO. 1 CLEARANCE WARNING BUZZER


    1. B004VDG

      for LHD:


      1. Connect the connector.

      2. Attach the clamp to install the No. 1 clearance warning buzzer.

    2. B004SUZ

      for RHD:


      1. Connect the connector.

      2. Attach the clamp to install the No. 1 clearance warning buzzer.

  2. INSTALL NO. 1 HEATER TO REGISTER DUCT

    Click here

  3. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY

    Click here

  4. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY

    Click here

  5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  6. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  7. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  8. CHECK SRS WARNING LIGHT

    Click here