Click here

PARKING SUPPORT ALERT SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Click here
Click here
DTC Code DTC Name
  HOW TO PROCEED WITH TROUBLESHOOTING
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the following procedure to troubleshoot the parking support alert system.

  • *: Use the GTS.

Click here

PROCEDURE


  1. Click here

    VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

  2. Click here

    CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT

  3. Click here

    INSPECT AUXILIARY BATTERY VOLTAGE


    1. Measure the auxiliary battery voltage with the power switch off.

      Standard voltage
      11 to 14 V

      If the voltage is below 11 V, replace or recharge the auxiliary battery before proceeding to the next step.

      Result
      Proceed to
      NEXT

  4. Click here

    CHECK CAN COMMUNICATION SYSTEM*


    1. Use the GTS to check if the CAN communication system is functioning normally.

      Click here

      Result
      Result Proceed to
      CAN communication system DTCs are not output (w/ Blind Spot Monitor System) A
      CAN communication system DTCs are not output (w/o Blind Spot Monitor System) B
      CAN communication system DTCs are output C

  5. Click here

    CHECK BLIND SPOT MONITOR SYSTEM*


    1. Use the GTS to check if the blind spot monitor system is functioning normally.

      Click here

      Result
      Result Proceed to
      DTCs are not output (w/ Panoramic View Monitor System) A
      DTCs are not output (w/ Parking Assist Monitor System) B
      DTCs are output C

  6. Click here

    CHECK PANORAMIC VIEW MONITOR SYSTEM*


    1. Use the GTS to check if the panoramic view monitor system system is functioning normally.

      Click here

      Result
      Result Proceed to
      DTCs are not output A
      DTCs are output B

  7. Click here

    PROBLEM SYMPTOM CONFIRMATION

    Result
    Proceed to
    NEXT

  8. Click here

    CHECK DTC*


    1. Check for DTCs.

      Click here


      1. Body Electrical > IPA/ICS/Clearance Sonar > Trouble Codes


      Result
      Result Proceed to
      DTCs are output A
      DTCs are not output (Problem symptom does not occur) B
      DTCs are not output (Problem symptom occurs) C

  9. Click here

    DIAGNOSTIC TROUBLE CODE CHART (PARKING SUPPORT ALERT SYSTEM)


    1. Refer to Diagnostic Trouble Code Chart.

      Click here

      Note:

      The clearance warning ECU assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking support alert system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.

      System Proceed to
      Parking Support Brake System

      Click here
      Result
      Proceed to
      NEXT

  10. Click here

    SYMPTOM SIMULATION


    1. Refer to Symptom Simulation.

      Click here

      Result
      Proceed to
      NEXT

  11. Click here

    PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table.

      Click here

      Result
      Result Proceed to
      Fault is not listed in Problem Symptoms Table A
      Fault is listed in Problem Symptoms Table B

  12. Click here

    OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Operation Check

      Click here

    2. Terminals of ECU

      Click here

    3. Data List / Active Test

      Click here

      Result
      Proceed to
      NEXT

  13. Click here

    CIRCUIT INSPECTION

    Result
    Proceed to
    NEXT

  14. Click here

    IDENTIFICATION OF PROBLEM

    Result
    Proceed to
    NEXT

  15. Click here

    REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

  16. Click here

    CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    • NEXT

      END