MAYDAY BATTERY INSTALLATION

PROCEDURE

1. Click here

   INSTALL MAYDAY BATTERY

   
   
   1. 

      Set the mayday battery into place on the No. 2 telephone bracket.

   2. 

      Install in this Direction (1)

      Install in this Direction (2)

      Temporarily install the mayday battery with bracket as shown in the illustration.

   3. 

      Install the nut.

2. Click here

   INSTALL MAYDAY BATTERY WITH BRACKET

   
   
   1. 

      Connect the connector.

   2. 

      Insert the guide and install the mayday battery with bracket with the 2 bolts.

   3. Connect the clamp.

3. Click here

   INSTALL PASSENGER SIDE JUNCTION BLOCK ASSEMBLY WITH NETWORK GATEWAY ECU

   Click here

4. Click here

   INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

5. Click here

   CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

6. Click here

   INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

   Click here

7. Click here

   PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here

8. Click here

   INSPECT SRS WARNING LIGHT

   Click here