NAVIGATION ANTENNA INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NAVIGATION ANTENNA BRACKET

  2. INSTALL NAVIGATION ANTENNA ASSEMBLY


    1. B004RZSC01
      B004RMI Install in this Direction

      While moving the navigation antenna assembly in the direction indicated in the illustration, install it to the navigation bracket guide.

    2. Attach the claw and install the navigation antenna assembly.

    3. B004TZJ

      Connect the connector and attach the claw.

  3. INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET (for LHD)


    1. for G-BOOK:


      1. Install the navigation antenna assembly with bracket the 2 screws.

      2. Attach the clamp.

        B004SEX

    2. except G-BOOK:


      1. Install the navigation antenna assembly with bracket the 2 screws.

      2. Attach the clamp.

        B004USG

  4. INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET (for RHD)


    1. Install the navigation antenna assembly with bracket the 2 screws.

    2. Attach the clamp.

      B004YNL

  5. INSTALL DEFROSTER NOZZLE ASSEMBLY

    Click here

  6. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

    Click here

  7. INSTALL NO. 5 HEATER TO REGISTER DUCT

    Click here

  8. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

    Click here

  9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  11. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  12. INSPECT SRS WARNING LIGHT

    Click here