ACTIVE NOISE CONTROL MICROPHONE INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL ACTIVE NOISE CONTROL MICROPHONE (for Front Side)

   
   

   1. for 12 Speakers:

      
      

      1. Attach the claw and install the active noise control microphone.

      2. Connect the connector.

         

         *A

         for RH Side

         *B

         for LH Side

   2. for 24 Speakers:

      
      

      1. Attach the claw and install the active noise control microphone.

      2. Connect the connector.

         

         *A

         for RH Side

         *B

         for LH Side

2. INSTALL ROOF HEADLINING ASSEMBLY

   Click here

3. INSTALL ACTIVE NOISE CONTROL MICROPHONE (SPOT LIGHT ASSEMBLY) (for Rear Side)

   Click here

4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

5. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

   Click here

6. INSPECT SRS WARNING LIGHT

   Click here

7. PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK (for Front Passenger Side)

   Click here

8. INSPECT FRONT SEAT ASSEMBLY

   Click here

9. INSPECT REAR SEAT ASSEMBLY (for Power Seat)

   Click here

10. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

    Click here

11. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

    Click here

12. INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here

13. INSPECT SEAT BELT WARNING SYSTEM

    
    

    1. w/o Occupant Classification System:

       Click here

    2. w/ Occupant Classification System:

       Click here