AMPLIFIER ANTENNA INSTALLATION
CAUTION / NOTICE / HINT
PROCEDURE
-
INSTALL NO. 2 AMPLIFIER ANTENNA ASSEMBLY
-
Bolt 
Connector Attach the guide.
-
Install the No. 2 amplifier antenna assembly with the bolt.
- Torque:
- 8.0 N*m { 82 kgf*cm, 71 in.*lbf }
-
Connect the 2 connectors.
-
-
INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY
-
Bolt Connector Attach the guide.
-
Install the No. 1 amplifier antenna assembly with the bolt.
- Torque:
- 8.0 N*m { 82 kgf*cm, 71 in.*lbf }
-
Connect the 2 connectors.
-
-
INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH
-
INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH
-
INSTALL PACKAGE TRAY TRIM SIDE COVER RH
-
INSTALL PACKAGE TRAY TRIM SIDE COVER LH
-
INSTALL PACKAGE TRAY TRIM GARNISH RH
-
INSTALL PACKAGE TRAY TRIM GARNISH LH
-
INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH
-
INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH
-
INSTALL REAR SEAT SIDE GARNISH RH
-
INSTALL REAR SEAT SIDE GARNISH LH
-
INSTALL REAR DOOR SCUFF PLATE RH
-
INSTALL REAR DOOR SCUFF PLATE LH
-
INSTALL REAR SEAT ASSEMBLY
-
for Fixed Seat Type:
-
for Power Seat:
-
-
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
-
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
-
PERFORM DIAGNOSTIC SYSTEM CHECK
-
INSPECT SRS WARNING LIGHT
-
INSPECT REAR SEAT ASSEMBLY (for Power Seat)
-
INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)
-
INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)
-
INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)
-
INSPECT SEAT BELT WARNING SYSTEM
-
w/o Occupant Classification System:
-
w/ Occupant Classification System:
-