REAR SEAT ENTERTAINMENT SYSTEM Does not Connect to Rear-Miracast

PROCEDURE

1. Click here

   CHECK FOREIGN OBJECT

   
   

   1. Check that there are no metallic objects placed in front of the front surface of the disc player assembly.

      OK
      No foreign matter

      Result
      Proceed to OK NG

   
   
   • OKClick here
   • NG

     REMOVE FOREIGN OBJECT AND RECHECK

2. Click here

   CHECK DEVICE

   
   

   1. Check whether the customer's device supports "Miracast" functionality.

      Tip:

      For supported devices,Click here

      Result
      Result Proceed to The customer's device supports "Miracast" functionality A The customer's device does not support "Miracast" functionality B

   
   
   • AClick here
   • B

     CHECK USING ANOTHER "Miracast" COMPATIBLE DEVICE

3. Click here

   CHECK DEVICE SETTINGS

   
   

   1. Check whether the "Miracast" functionality is set to "On" in the settings of the customer's device.

      Tip:
      

      • "Miracast" is normally set to "Off" by default. As a result, the setting must be manually changed to "On".

      • The operation method differs depending on the device. The name "Miracast" also refers to "Screen Mirroring" and "Media Output", etc.

      Result
      Result Proceed to "Miracast" functionality is set to "On" in the settings of the customer's device A "Miracast" functionality is not set to "On" in the settings of the customer's device B

   
   
   • AClick here
   • B

     CHECK AFTER TURNING "Miracast" FUNCTIONALITY TO "ON"

4. Click here

   CHECK DISC PLAYER ASSEMBLY SETTING

   
   

   1. Check that the "Wi-Fi power" setting is "On" in the "Wi-Fi" settings on the television display.

   2. Check that the "Access to network" setting is "Off" in the "Wi-Fi" settings on the television display.*

      
      

      • *: w/ "Wi-Fi" (Station) Function

   3. Check that the "Bluetooth power" setting is "Off" on the multi-display.

      Tip:

      Bluetooth and "Miracast" and "Wi-Fi" use the same 2.4 GHz band radio waves. As a result, the connection may suffer from outages due to radio interference if connecting simultaneously.

      Result
      Proceed to NEXT

   
   
   • NEXTClick here
5. Click here

   CHECK CONNECTION RESULT

   
   

   1. Check connection:

      
      

      1. Check the connection between the device and "Miracast" on the television display in the vehicle and on the device itself.

      2. Allow Miracast video to be streamed to the television display and wait for 15 seconds.

      3. Check that the smart phone screen is displayed on the television display.

      Tip:

      If the "Miracast" connection cannot be established even after checking, confirm the connection again.

      Result
      Result Proceed to Smartphone screen is displayed on the television display A "Miracast" connection cannot be established even after performing the above connection check twice B

   
   
   • A

     USE SIMULATION METHOD TO CHECKClick here

   • BClick here
6. Click here

   CHECK USING ANOTHER DEVICE

   
   

   1. Check using another "Miracast" supported device.

      Result
      Result Proceed to Established connection with "Miracast" A Could not establish connection with "Miracast" B

   
   
   • A

     END (DEVICE IS DEFECTIVE)

   • B

     REPLACE DISC PLAYER ASSEMBLYClick here