Click here

AUDIO AND VISUAL SYSTEM, Diagnostic DTC:U0073, U0100, U0129, U0140, U0155, U0164, U0208, U0209, U023B, U0265, U0293, U1110

Click here
Click here
DTC Code DTC Name
U0073 Sending Malfunction (Navigation to APGS)
U0100 Engine ECU Communication
U0129 VSC(ECB)ECU Communication
U0140 Lost Communication with Body Control Module
U0155 Meter ECU Communication
U0164 Air Conditioner ECU Communication
U0208 Lost Communication with "Seat Control Module A"
U0209 Lost Communication with "Seat Control Module B"
U023B Lost Communication with Image Processing Module "B"
U0265 Lost Communication with Image Processing Sensor A
U0293 HV ECU Communication
U1110 Clearance Sonar ECU Communication
Click here

DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0073 Sending Malfunction (Navigation to APGS) CAN bus connection error CAN communication system
U0100 Engine ECU Communication CAN reception error CAN communication system
U0129 VSC(ECB)ECU Communication CAN reception error CAN communication system
U0140 Lost Communication with Body Control Module CAN reception error CAN communication system
U0155 Meter ECU Communication CAN reception error CAN communication system
U0164 Air Conditioner ECU Communication CAN reception error CAN communication system
U0208 Lost Communication with "Seat Control Module A" CAN reception error CAN communication system
U0209 Lost Communication with "Seat Control Module B" CAN reception error CAN communication system
U023B Lost Communication with Image Processing Module "B" CAN reception error CAN communication system
U0265 Lost Communication with Image Processing Sensor A CAN reception error CAN communication system
U0293 HV ECU Communication CAN reception error CAN communication system
U1110 Clearance Sonar ECU Communication CAN reception error CAN communication system
Click here

PROCEDURE


  1. Click here

    CHECK DTC


    1. Clear the DTCs.

      Click here


      1. Body Electrical > Navigation System > Clear DTCs


    2. Turn the power switch off.

    3. Turn the power switch on (IG) and wait for 30 seconds.

    4. Recheck for DTCs and check if the same DTC is output again.

      Click here


      1. Body Electrical > Navigation System > Trouble Codes


      OK
      No DTCs are output.
      Result
      Proceed to
      OK
      NG