ELECTRIC PARKING BRAKE SYSTEM, Diagnostic DTC:C13AE

DTC Code DTC Name
C13AE System information not received

DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
C13AE System Information not Received

  • Diagnosis Condition:

    Power switch on (IG)

  • Malfunction Status:

    When the power switch is turned on (IG) the first time after replacing the parking brake ECU assembly, the parking brake ECU assembly is unable to receive signals from the hybrid vehicle control ECU assembly

  • Malfunction Duration:

    Approximately 4 seconds

  • Hybrid vehicle control ECU assembly

  • CAN communication system

  • Parking brake ECU assembly

 Yes An electric parking brake system malfunction is displayed on the multi-information display.

CAUTION / NOTICE / HINT

Note

If the parking brake ECU assembly is replaced, perform the "Reset Memory" and "Acquire Tension Sensor Zero Point" procedures.

Click here

PROCEDURE


  1. CHECK DTC


    1. Turn the power switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG) and the GTS on.

    4. Check for DTC.

      Click here


      Chassis > Electric Parking Brake > Trouble Codes
      Result
      Result Proceed to
      DTC C13AE and a CAN communication malfunction DTC are output at the same time A
      DTC C13AE is output and the master warning light is illuminated B
      Only DTC C13AE is output C
      No outputs D

    A

    GO TO CAN COMMUNICATION SYSTEM Click here

    B

    GO TO HYBRID CONTROL SYSTEM Click here

    C

    REPLACE PARKING BRAKE ECU ASSEMBLY Click here

    D

    USE SIMULATION METHOD TO CHECK Click here