PROCEDURE
INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY
| *1 | String |
Tie the string that was passed into the engine room to the end of the hood lock control cable assembly.
Pull the string from the cabin until the stopper of the hood lock control cable assembly makes contact with the grommet to install.
Attach the clamps and install the hood lock control cable assembly.
| *1 | Hood Lock Control Cable Assembly | *2 | Stopper |
Remove the string.
INSTALL HOOD LOCK CONTROL CABLE COVER LH
|
Install in this Direction |
Pass the hood lock control cable assembly and hood lock control assembly through the hood lock control cable cover LH as shown in the illustration.
Connect the hood lock control cable assembly.
Attach the claw and install the hood lock control cable cover LH with the screw.
INSTALL HOOD LOCK ASSEMBLY
INSTALL HOOD LOCK RELEASE LEVER PROTECTOR
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Connect the hood lock control lever sub-assembly to the hood lock control cable assembly.
Attach the claw and install the hood lock control lever sub-assembly.
INSTALL FRONT BUMPER COVER
except Sport Package
for Sport Package
INSPECT FITTING OF HOOD SUB-ASSEMBLY
ADJUST HOOD SUB-ASSEMBLY
INSTALL FRONT FENDER REINFORCEMENT SUB-ASSEMBLY TOP LH
INSTALL RADIATOR LOWER AIR DEFLECTOR
INSTALL UPPER RADIATOR SUPPORT SEAL
INSTALL RADIATOR COVER PLATE
ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
PERFORM CALIBRATION
w/ Parking Support Brake System: