LUGGAGE DOOR HINGE TORSION BAR INSTALLATION

CAUTION / NOTICE / HINT

Note


  • When the torsion bar is removed, the tension in the torsion bar disappears and the luggage compartment door closes with strong force. Therefore, hold the luggage compartment door when opening or closing the luggage compartment door.

  • Because the torsion bar at the RH side is on the top and the torsion bar at the LH side is on the bottom, install from RH → LH and remove from LH → RH.

PROCEDURE


  1. INSTALL LUGGAGE DOOR HINGE TORSION BAR RH


    1. B004U6WC06
      *1 Washer (90201-10008)

      Install the washer (90201-10008) to SST (luggage compartment door torsion bar tool) as shown in the illustration.

      SST
      09804-24010
      OK
      Area Specified Condition
      A 4.5 mm (0.177 in.)
    2. B004VMS

      Attach the clamp.

    3. B004U44

      Using SST (luggage compartment door torsion bar tool), install the luggage door hinge torsion bar RH to the luggage compartment door hinge assembly RH.

    4. Install the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support.

  2. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH


    1. B004RNSC06
      *1 Washer (90201-10008)

      Install the washer (90201-10008) to SST (luggage compartment door torsion bar tool) as shown in the illustration.

      SST
      09804-24010
      OK
      Area Specified Condition
      A 4.5 mm (0.177 in.)
    2. B004SL0

      Attach the clamp.

    3. B004X37

      Using SST (luggage compartment door torsion bar tool), install the luggage door hinge torsion bar LH to the luggage compartment door hinge assembly LH.

    4. Install the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support.

  3. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

  4. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Click here

  5. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  6. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear Air Conditioning System)

    Click here

  8. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Rear Air Conditioning System)

    Tech Tips

    Use the same procedure described for the front luggage compartment trim cover (w/o Rear Air Conditioning System).

  9. INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER

    Click here

  10. INSTALL TOOL BOX

    Click here

  11. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  12. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

  13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  14. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  15. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here

  16. INSTALL NO. 2 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  17. INSTALL SWITCH BEZEL

    Click here

  18. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  19. INITIALIZE POWER TRUNK LID CONTROL SYSTEM

    Tech Tips

    When the luggage compartment door is opened using a mechanical key.

    Click here