Click here

POWER WINDOW REGULATOR MOTOR(for Rear Door) INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY LH


    1. B004SB7

      Using a T25 "TORX" socket wrench, install the power window regulator motor assembly LH to the rear door window regulator assembly LH with the 3 "TORX" screws.

      Tip:

      A new rear window regulator uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.

      5.4 N*m 55 kgf*cm 48 in.*lbf
  2. Click here

    INSTALL REAR DOOR WINDOW REGULATOR ASSEMBLY LH

    Click here

  3. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  5. Click here

    INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  6. Click here

    INSPECT POWER WINDOW OPERATION

    Click here

  7. Click here

    INSPECT DOOR LOCK OPERATION

    Click here