| DTC Code | DTC Name |
|---|---|
| U0142 | Lost Communication With Mainbody ECU |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module |
| U0201 | Lost Communication with "Door Control Module C" |
| U0202 | Lost Communication with "Door Control Module D" |
| U0208 | Lost Communication with "Seat Control Module A" |
| U0209 | Lost Communication with "Seat Control Module B" |
DESCRIPTION
These DTCs are stored when a malfunction occurs in the CAN communication circuit.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0142 | Lost Communication With Mainbody ECU | CAN reception error | CAN communication system |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | CAN reception error | CAN communication system |
| U0201 | Lost Communication with "Door Control Module C" | CAN reception error | CAN communication system |
| U0202 | Lost Communication with "Door Control Module D" | CAN reception error | CAN communication system |
| U0208 | Lost Communication with "Seat Control Module A" | CAN reception error | CAN communication system |
| U0209 | Lost Communication with "Seat Control Module B" | CAN reception error | CAN communication system |
PROCEDURE
CLEAR DTC
Clear the DTCs.
| Result | ||
|---|---|---|
|
CHECK FOR DTC
Check for DTCs.
| OK |
|---|
| DTC U0142, U0155, U0201, U0202, U0208 and U0209 are not output. |
| Result | |||
|---|---|---|---|
|
If CAN communication system malfunction DTCs are output, they may also be output for other systems.
If the CAN communication system has been checked and repaired in other systems, the DTC will not be output after rechecking for DTCs.
If the DTC is output frequently, duplicate the conditions that cause a malfunction and perform the check again, even though the DTC was not output after rechecking for DTCs.
USE SIMULATION METHOD TO CHECKClick here
GO TO CAN COMMUNICATION SYSTEMClick here