VOLTAGE INVERTER INSTALLATION

PROCEDURE

1. INSTALL VOLTAGE INVERTER ASSEMBLY

   
   

   1. 

      	Nut
      	Connector

      Install the voltage inverter assembly with the 2 nuts.

      Torque:

      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

      Note

      

      If the removed nut is the same shape as that shown in the illustration, replace it the supplied replacement part.

   2. Connect the connector.

2. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET LH

   Tech Tips

   Use the same procedure described for the RH side.

   Click here

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

   Tech Tips

   Use the same procedure described for the RH side.

   Click here

4. INSTALL REAR FLOOR FINISH PLATE

   Click here

5. INSTALL ROPE HOOK ASSEMBLY

   Click here

6. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

8. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear Air Conditioning System)

   Click here

9. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Rear Air Conditioning System)

   Click here

10. INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER

    Click here

11. INSTALL TOOL BOX

    Click here

12. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

13. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

14. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

15. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here