AIR CONDITIONING PRESSURE SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE RADIATOR COVER PLATE

    Click here

  2. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  3. REMOVE LOWER RADIATOR AIR DEFLECTOR

    Click here

  4. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM


    1. for HFC-134a(R134a):

      Click here

    2. for HFO-1234yf(R1234yf):

      Click here

  5. REMOVE FRONT BUMPER ASSEMBLY


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  6. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  7. REMOVE LOW PITCHED HORN ASSEMBLY

    Click here

  8. REMOVE LOWER ARM BRACKET BRACE SUB-ASSEMBLY LH

    Click here

  9. REMOVE AIR CONDITIONER PRESSURE SENSOR


    1. B004VD8C01
      B004SZX No. 2 Cooler Cover
      B004UK4 Connector

      Disconnect the connector.

    2. Remove the No. 2 cooler cover.

    3. B004S9QC01
      *a Turn
      *b Hold
      B004RMI Remove in this Direction

      Using a 27 mm deep socket wrench, remove the air conditioner pressure sensor from the liquid tube sub-assembly A.

      Note


      • Do not apply excessive force to the liquid tube sub-assembly A.

      • Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.