TRUNK LID ACTUATOR INSTALLATION

PROCEDURE


  1. INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY


    1. B004RTOC03
      B004RMI Install in this Direction

      Insert the guide and temporarily install the luggage closer motor assembly in the direction indicated by the arrow shown in the illustration.

      Note


      • While holding the luggage close motor assembly, install it.

      • Do not drop the luggage closer motor assembly.

      • Do not reuse a luggage closer motor assembly that has been subjected to an impact or dropped.

    2. B004UUHC06
      B004SZX Bolt
      B004UK4 Nut
      B004XCB Connector

      Tighten the 3 bolts in the order shown in the illustration to install the luggage closer motor assembly.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Install the rod with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    4. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. B004Y81C03
      B004RMI Install in this Direction

      Install the luggage compartment trim cover assembly LH with the 2 clips.

    2. Install a grommet.

    3. B004VZ8C03
      B004RMI Install in this Direction
      B004UK4 Push

      Push the lever in the direction of the arrow shown in the illustration and install the rope hook.

  3. INSTALL REAR FLOOR FINISH PLATE

    Click here

  4. INSTALL ROPE HOOK ASSEMBLY

    Click here

  5. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  6. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear Air Conditioning System)

    Click here

  8. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Rear Air Conditioning System)

    Tech Tips

    Use the same procedure described for the front luggage compartment trim cover (w/o Rear Air Conditioning System).

  9. INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER

    Click here

  10. INSTALL TOOL BOX

    Click here

  11. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  12. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

  13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  14. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  15. INITIALIZE POWER TRUNK LID CONTROL SYSTEM

    Click here

  16. CHECK POWER TRUNK LID CONTROL SYSTEM

    Click here