LUGGAGE CLOSER ECU INSTALLATION

PROCEDURE

1. Click here

   INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY

   
   
   1. 

      Install in this Direction

      Insert the guide and temporarily install the luggage closer motor assembly in the direction indicated by the arrow shown in the illustration.

      Note:
      

      • While holding the luggage close motor assembly, install it.

      • Do not drop the luggage closer motor assembly.

      • Do not reuse a luggage closer motor assembly that has been subjected to an impact or dropped.

   2. 

      	Bolt
      	Nut
      	Connector

      Tighten the 3 bolts in the order shown in the illustration to install the luggage closer motor assembly.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

   3. Install the rod with the nut.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

   4. Connect the connector.

2. Click here

   INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

   
   
   1. 

      Install in this Direction

      Install the luggage compartment trim cover assembly LH with the 2 clips.

   2. Install a grommet.

   3. 

      	Install in this Direction
      	Push

      Push the lever in the direction of the arrow shown in the illustration and install the rope hook.

3. Click here

   INSTALL REAR FLOOR FINISH PLATE

   Click here

4. Click here

   INSTALL ROPE HOOK ASSEMBLY

   Click here

5. Click here

   INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

6. Click here

   INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

7. Click here

   INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear Air Conditioning System)

   Click here

8. Click here

   INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Rear Air Conditioning System)

   Tip:

   Use the same procedure described for the front luggage compartment trim cover (w/o Rear Air Conditioning System).

9. Click here

   INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER

   Click here

10. Click here

    INSTALL TOOL BOX

    Click here

11. Click here

    INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

12. Click here

    INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

13. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

14. Click here

    INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

15. Click here

    INITIALIZE POWER TRUNK LID CONTROL SYSTEM

    Click here

16. Click here

    CHECK POWER TRUNK LID CONTROL SYSTEM

    Click here