Click here

POWER SWITCH REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here

PROCEDURE


  1. Click here

    REMOVE INSTRUMENT SIDE PANEL LH (for LHD)

    Click here

  2. Click here

    REMOVE INSTRUMENT SIDE PANEL RH (for RHD)

    Click here

  3. Click here

    REMOVE LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY

    Click here

  4. Click here

    REMOVE NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  5. Click here

    REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  6. Click here

    REMOVE INSTRUMENT PANEL SAFETY PAD INSERT SUB-ASSEMBLY

    Click here

  7. Click here

    REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here

  8. Click here

    REMOVE POWER SWITCH


    1. for LHD:


      1. B004S7DC01
        *a Protective Tape
        B004V32 Insert Screwdriver Here
        B004RMI Remove in this Direction

        Disconnect the connector.

      2. Insert a screwdriver at the position shown in the illustration and detach the claw and remove the power switch.

        Tip:

        Tape the screwdriver tip before use.

    2. for RHD:


      1. B004RP3C01
        *a Protective Tape
        B004V32 Insert Screwdriver Here
        B004RMI Remove in this Direction

        Disconnect the connector.

      2. Insert a screwdriver at the position shown in the illustration and detach the claw and remove the power switch.

        Tip:

        Tape the screwdriver tip before use.