FRONT CRANKSHAFT OIL SEAL REMOVAL

Click here Click here

PROCEDURE

1. Click here

   DRAIN ENGINE OIL

   Click here

2. Click here

   REMOVE V-RIBBED BELT

   Click here

3. Click here

   REMOVE WIRE HARNESS CLAMP BRACKET

   Click here

4. Click here

   DISCONNECT HEATER ACCESSORY ASSEMBLY

   
   
   1. 

      Remove the nut and disconnect the heater accessory assembly.

5. Click here

   REMOVE CRANKSHAFT PULLEY

   
   
   1. 

      *a	Hold
      	Turn

      Using SST to hold the crankshaft pulley, loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

      09213-70011	09213-70020
      09330-00021

   2. 

      *a	Hold
      	Turn

      Using SST, remove the crankshaft pulley bolt and crankshaft pulley.

      09950-50013

      09951-05010

      09952-05010

      09953-05010

      09954-05021

6. Click here

   REMOVE CRANKSHAFT TIMING GEAR KEY

   
   
   1. 

      Remove the crankshaft timing gear key of the key groove.

7. Click here

   REMOVE TIMING CHAIN CASE OIL SEAL

   
   
   1. 

      *a	Protective Tape

      Using a screwdriver with its tip taped, pry out the timing chain case oil seal.

      Note:

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.