Click here

ACCELERATOR PEDAL SENSOR REMOVAL

Click here
Click here Click here

PROCEDURE


  1. Click here

    REMOVE MAIN BODY ECU (for RHD)

    Click here

  2. Click here

    REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  3. Click here

    REMOVE ACCELERATOR PEDAL


    1. B004UT3

      Detach the 4 claws and remove the accelerator pedal pad.

    2. B004S30

      Remove the 2 bolts and accelerator pedal.

  4. Click here

    REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note:

    • Avoid excessive force to the accelerator pedal sensor.

    • Do not disassemble the accelerator pedal sensor assembly.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or lubricant to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.


    1. B004UOY

      Remove the 3 nuts and accelerator pedal sensor assembly.

      Note:

      • Do not drop the accelerator pedal sensor assembly, strike it with tools or subject it to impact.

      • If the accelerator pedal sensor assembly is subjected to an impact, replace it with a new one.

    2. Disconnect the connector.