BATTERY COOLING FILTER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL NO. 2 HV BATTERY INTAKE FILTER

   
   
   1. 

      Attach the 2 guides to temporarily install the No. 2 HV battery intake filter.

   2. Attach the 2 claws to install the No. 2 HV battery intake filter.

2. Click here

   INSTALL ROOM VENTILATION GRILLE SUB-ASSEMBLY LH

   
   
   1. 

      *A	for Fixed Seat Type
      *B	for Power Seat

      Attach the 6 claws to install the room ventilation grille sub-assembly LH.

3. Click here

   INSTALL REAR SEAT SIDE GARNISH LH

   Click here

4. Click here

   INSTALL REAR DOOR SCUFF PLATE LH

   Click here

5. Click here

   INSTALL REAR SEATBACK ASSEMBLY LH (for Power Seat)

   Click here

6. Click here

   INSTALL REAR SEAT CUSHION LOCK HOOK (for Power Seat)

   Click here

7. Click here

   INSTALL REAR SEAT CUSHION ASSEMBLY LH (for Power Seat)

   Click here

8. Click here

   INSTALL REAR SEAT BACK HOLDER (for Fixed Seat Type)

   Click here

9. Click here

   INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type)

   Click here

10. Click here

    INSTALL NO. 1 SEAT ARMREST CAP (for Fixed Seat Type)

    Click here

11. Click here

    INSTALL REAR SEAT CUSHION LOCK HOOK (for Fixed Seat Type)

    Click here

12. Click here

    INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

    Click here

13. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

14. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

15. Click here

    CLEAR DTC

    Tip:

    If the message "Maintenance Required for Traction battery Cooling Parts See owner's manual" is displayed on the multi-information display, clean or replace the No. 2 HV battery intake filter, and clear the DTCs to reset the learning values even if no DTCs are output.

    Click here