HYBRID VEHICLE CONTROL ECU INSTALLATION

PROCEDURE

1. Click here

   INSTALL HYBRID VEHICLE CONTROL ECU ASSEMBLY

   
   

   1. Install the hybrid vehicle control ECU assembly with the bolt and nut.

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

      Note:
      

      • Do not drop the hybrid vehicle control ECU assembly, strike it with tools or subject it to impact.

      • If the hybrid vehicle control ECU assembly is subjected to an impact, replace it with a new one.

   2. Connect the 4 connectors.

2. Click here

   INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. Click here

   INSTALL GLOVE COMPARTMENT DOOR PAD PLATE

   Click here

4. Click here

   INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

   Click here

5. Click here

   INSTALL LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY

   Click here

6. Click here

   INSTALL INSTRUMENT SIDE PANEL LH

   Click here

7. Click here

   INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

8. Click here

   CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

9. Click here

   INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

   Click here

10. Click here

    PERFORM RESET MEMORY

    If the hybrid vehicle control ECU assembly is replaced, initialize the learning value of the transmission.

    
    

    • for L310:

      Click here

    • for L310F:

      Click here