CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE RADIATOR COVER PLATE

    Click here

  3. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  4. REMOVE LOWER RADIATOR AIR DEFLECTOR

    Click here

  5. DISCONNECT NO. 2 PCV HOSE

    Click here

  6. REMOVE AIR CLEANER WITH AIR CLEANER HOSE

    Click here

  7. REMOVE VVT SENSOR (for Intake Side of Bank 1)


    1. B004WIH

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  8. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


    1. B004THM

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  9. REMOVE VVT SENSOR (for Intake Side of Bank 2)


    1. B004YJ5

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  10. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


    1. B004YD1

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.