Click here

ROAD SIGN ASSIST SYSTEM(for Mono Camera Type), Diagnostic DTC:C1AA4, C1AA5

Click here
Click here
DTC Code DTC Name
C1AA4 Yaw Rate Sensor Circuit
C1AA5 Yaw Rate Sensor Power Supply Voltage Circuit
Click here

DESCRIPTION

The forward recognition camera receives vehicle stability signals from the yaw rate sensor. If the yaw rate sensor detects an abnormal yaw rate sensor signal or yaw rate sensor power supply voltage, it informs the forward recognition camera via CAN communication, and DTC C1AA4 or C1AA5 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AA4 Yaw Rate Sensor Circuit 2 seconds after the power switch is turned on (IG), a signal from the yaw rate sensor indicating a malfunction in the yaw rate sensor is detected by the forward recognition camera for 5 seconds or more. Electronically controlled brake system
C1AA5 Yaw Rate Sensor Power Supply Voltage Circuit 2 seconds after the power switch is turned on (IG), a signal from the yaw rate sensor indicating an abnormal yaw rate sensor power supply voltage signal is detected by the forward recognition camera for 5 seconds or more. Electronically controlled brake system
Click here

CAUTION / NOTICE / HINT

Note:

The road sign assist system uses the CAN communication system. First, confirm that there are no malfunction in the CAN communication system. Refer to How to Proceed with Troubleshooting.

Click here

Click here

PROCEDURE


  1. Click here

    CHECK FOR DTCs (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)

    Tip:

    Road sign assist system DTC C1AA4 or C1AA5 may be stored due to a malfunction in the electronically controlled brake system. Therefore it is necessary to check for and troubleshoot electronically controlled brake system DTCs first.


    1. Check for DTCs.

      Click here


      1. Chassis > ABS/VSC/TRC > Trouble Codes


      Result
      Proceed to
      NEXT

    • NEXT

      GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEMClick here