REAR BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 3 LUGGAGE ROOM WIRE

    Click here

  2. REMOVE REAR CORNER ULTRASONIC SENSOR

    Click here

  3. REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER

    Click here

  4. REMOVE REAR CENTER ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure as for the rear corner ultrasonic sensor.

  5. REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER

    Tech Tips

    Use the same procedure as for the rear corner ultrasonic sensor retainer.

  6. REMOVE ULTRASONIC SENSOR CLIP

    Click here

  7. REMOVE BACK-UP LIGHT ASSEMBLY

    Click here

  8. REMOVE LICENSE PLATE LIGHT SUB-ASSEMBLY


    1. B004BX5

      Remove the retainer.

    2. Detach the claws and remove the license plate light sub-assembly.

  9. REMOVE NO. 1 MOULDING TAPE

    Tech Tips

    When removing the No. 1 moulding tape, heat the rear bumper cover and No. 1 moulding tape using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)
    No. 1 Moulding Tape

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004AM0C23
    *a Heated Part
    *b Heat Light

    1. Using a heat light, heat the rear bumper cover and No. 1 moulding tape.

    2. B000PMQ

      Remove the No. 1 moulding tape.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  10. REMOVE REAR BUMPER PIECE LH


    1. B004CRFC01
      B004B1M Remove in this Direction

      Detach the claws.

    2. Detach the anti-drop hook and remove the rear bumper piece LH as shown in the illustration.

  11. REMOVE REAR BUMPER PIECE RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE REAR BUMPER EXTENSION SUB-ASSEMBLY LH


    1. B004BAR

      Remove the 4 screws.

    2. B004C4HC01
      B004B1M Remove in this Direction

      Remove the 4 grommets.

    3. Remove the rear bumper extension sub-assembly LH as shown in the illustration.

  13. REMOVE REAR BUMPER EXTENSION SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. REMOVE REAR BUMPER CENTER EXTENSION SUB-ASSEMBLY


    1. B004A70

      Remove the 6 screws.

    2. Remove the 2 clips.

    3. B004C4BC01
      B004B1M Remove in this Direction

      Detach the guides and claws and remove the rear bumper center extension sub-assembly as shown in the illustration.

  15. REMOVE REAR BUMPER CENTER PAD

    Tech Tips

    When removing the rear bumper center pad, heat the rear bumper cover and rear bumper center pad using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)
    Rear Bumper Center Pad

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004AM0C23
    *a Heated Part
    *b Heat Light

    1. Using a heat light, heat the rear bumper cover and rear bumper center pad.

    2. B004AHP

      Remove the rear bumper center pad.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  16. REMOVE REAR BUMPER NO. 1 PAD

    Tech Tips

    When removing the rear bumper No. 1 pad, heat the rear bumper cover and rear bumper No. 1 pad using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)
    Rear Bumper No. 1 Pad

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004AM0C23
    *a Heated Part
    *b Heat Light

    1. Using a heat light, heat the rear bumper cover and rear bumper No. 1 pad.

    2. B004C0P

      Remove the rear bumper No. 1 pad.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  17. REMOVE REAR BUMPER PAD (w/ Rear Bumper Pad)

    Tech Tips

    When removing the rear bumper pad, heat the rear bumper cover and rear bumper pad using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)
    Rear Bumper Pad

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004AM0C23
    *a Heated Part
    *b Heat Light

    1. Using a heat light, heat the rear bumper cover and rear bumper pad.

    2. B004A1W

      Remove the rear bumper pad.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  18. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    1. B004AI2

      Remove the screw.

    2. B004C9WC01
      B004B1M Remove in this Direction

      Detach the claw and remove the reflex reflector assembly LH.

  19. REMOVE REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  20. REMOVE REAR BUMPER EXTENSION LH


    1. B004ACL

      Remove the 2 screws.

    2. B004AASC01
      B004B1M Remove in this Direction

      Detach the claws and remove the rear bumper extension LH.

  21. REMOVE REAR BUMPER EXTENSION RH

    Tech Tips

    Use the same procedure described for the LH side.

  22. REMOVE REAR BUMPER EXTENSION


    1. B004BWZ

      Remove the 2 screws.

    2. Detach the claws and remove the rear bumper extension.

  23. REMOVE REAR BUMPER CORNER EXTENSION LH


    1. B004A3EC01
      B004B1M Turn Direction

      Remove the 3 screws.

    2. Detach the claws.

    3. With the guides as a starting point, turn the rear bumper corner extension LH to detach the clips and guides and remove the rear bumper corner extension LH as shown in the illustration.

  24. REMOVE REAR BUMPER CORNER EXTENSION RH

    Tech Tips

    Use the same procedure described for the LH side.

  25. REMOVE REAR BUMPER PAD INSERT

    Tech Tips

    When removing the rear bumper pad insert, heat the rear bumper corner extension LH and rear bumper pad insert using a heat light.

    Standard
    Item Temperature
    Rear Bumper Corner Extension LH 20 to 30°C (68 to 86°F)
    Rear Bumper Pad Insert

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004AM0C23
    *a Heated Part
    *b Heat Light

    1. Using a heat light, heat the rear bumper corner extension LH and rear bumper pad insert.

    2. B004AH1

      Remove the rear bumper pad insert.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  26. REMOVE REAR BUMPER NO. 3 PAD

    Tech Tips

    When removing the rear bumper No. 3 pad, heat the rear bumper corner extension LH and rear bumper No. 3 pad using a heat light.

    Standard
    Item Temperature
    Rear Bumper Corner Extension LH 20 to 30°C (68 to 86°F)
    Rear Bumper No. 3 Pad

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004AM0C23
    *a Heated Part
    *b Heat Light

    1. Using a heat light, heat the rear bumper corner extension LH and rear bumper No. 3 pad.

    2. B004AUR

      Remove the rear bumper No. 3 pad.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  27. REMOVE REAR BUMPER NO. 2 PAD

    Tech Tips

    When removing the rear bumper No. 2 pad, heat the rear bumper corner extension LH and rear bumper No. 2 pad using a heat light.

    Standard
    Item Temperature
    Rear Bumper Corner Extension LH 20 to 30°C (68 to 86°F)
    Rear Bumper No. 2 Pad

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004AM0C23
    *a Heated Part
    *b Heat Light

    1. Using a heat light, heat the rear bumper corner extension LH and rear bumper No. 2 pad.

    2. B004APY

      Remove the rear bumper No. 2 pad.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  28. REMOVE REAR BUMPER NO. 2 SIDE SUPPORT LH


    1. B004A0QC02
      B004B1M Remove in this Direction

      Detach the clips and claw and remove the rear bumper No. 2 side support LH.

  29. REMOVE REAR BUMPER NO. 2 SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  30. REMOVE REAR BUMPER NO. 4 SIDE SUPPORT LH


    1. B004B74

      Remove the 2 clips.

    2. B004AIJC01
      B004B1M Remove in this Direction

      Remove the grommet and rear bumper No. 4 side support LH.

  31. REMOVE REAR BUMPER NO. 4 SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  32. REMOVE REAR BUMPER NO. 1 SIDE SUPPORT LH


    1. B004C9V

      Remove the 2 grommets.

    2. B004BP2C01
      B004B1M Remove in this Direction

      Remove the 2 screws.

    3. Detach the guides and remove the rear bumper No. 1 side support LH.

  33. REMOVE REAR BUMPER NO. 1 SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  34. REMOVE REAR BUMPER ENERGY ABSORBER (for Reinforcement Type A)


    1. B004B8BC01
      B004B1M Remove in this Direction

      Detach the guides and remove the rear bumper energy absorber.

  35. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY (for Reinforcement Type A)


    1. B004BV3C01
      B004B1M Remove in this Direction

      Remove the 10 bolts and rear bumper reinforcement sub-assembly.

  36. REMOVE REAR BUMPER ARM REINFORCEMENT LH (for Reinforcement Type B)


    1. B004BZV

      Remove the 2 bolts.

    2. Detach the guide and remove the rear bumper arm reinforcement LH.

  37. REMOVE REAR BUMPER ARM REINFORCEMENT RH (for Reinforcement Type B)

    Tech Tips

    Use the same procedure described for the LH side.

  38. REMOVE REAR BUMPER BAR REINFORCEMENT LH (for Reinforcement Type B)


    1. B004BCX

      Remove the 3 bolts and rear bumper bar reinforcement LH.

  39. REMOVE REAR BUMPER BAR REINFORCEMENT RH (for Reinforcement Type B)

    Tech Tips

    Use the same procedure described for the LH side.

  40. REMOVE REAR BUMPER ENERGY ABSORBER (for Reinforcement Type B)

    B004BZO

    1. Detach the claws.

    2. Detach the guides and remove the rear bumper energy absorber.

  41. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY (for Reinforcement Type B)


    1. B0049YD

      Remove the 10 bolts and rear bumper reinforcement sub-assembly.