HAZARD WARNING SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  2. REMOVE FRONT DOOR OPENING TRIM COVER LH

    Click here

  3. REMOVE FRONT DOOR NO. 2 OPENING TRIM COVER LH

    Click here

  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. REMOVE NO. 1 GLOVE COMPARTMENT PANEL

    Click here

  6. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  7. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  8. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  9. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. B004AD2C01
      B0049X5 Place Hands Here
      B004B1M Remove in this Direction

      Place your hands at the location indicated shown in the illustration, pull the integration control and panel assembly toward the rear of the vehicle to detach the claw and clip to remove it.

    2. B004C40

      Detach the wire harness clamp and disconnect the 3 connectors.