POWER WINDOW MASTER SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. REMOVE FRONT DOOR TRIM COVER SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  3. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. B004CFK

      Detach the wire harness clamp.

    2. Remove the 5 screws and pull handle.

    3. B004AN0

      Detach the wire harness clamp and disconnect the connector.

    4. Remove the 3 screws.

    5. Detach the claw and remove the multiplex network master switch assembly with the switch base.

    6. B004B9Y

      Using a thin-bladed screwdriver, detach the claw and remove the multiplex network master switch assembly from the switch base.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.