WIRELESS DOOR LOCK CONTROL SYSTEM OPERATION CHECK


  1. CHECK CUSTOMIZE PARAMETERS

    Note

    The operation check below is based on the non-customized initial condition of the vehicle.

    Click here

  2. Tech Tips


    • The switches described in this text are the switches for transmitting signals. The switches are built into the electrical key transmitter sub-assembly.

    • All the functions listed below must be checked in comparison with the wireless door lock control operation area.

    CHECK BASIC FUNCTION


    1. Check whether the LED of the electrical key transmitter sub-assembly comes on 3 times when each switch is pressed and held for 5 seconds.

      Tech Tips


      • If the transmitter LED illuminates once or twice but not a third time when the switch has been pressed and held for 5 seconds or more, it may have a weak transmitter battery.

      • If the switch is held, the transmitter LED illuminates repeatedly.

    2. Check that all doors lock when the lock switch is pressed.

    3. Check that all doors unlock when the unlock switch is pressed.*1

    4. Check that the driver door unlocks when the unlock switch is pressed once, and all doors unlock when pressed twice within 5 seconds.*2

    5. Check that the luggage compartment door opens when the luggage door open switch is pressed and held for 0.8 seconds or more.


      • *1: Customize item "Unlock 2 Operation" or "Remote 2-Press Unlock" is set to "OFF".

      • *2: Customize item "Unlock 2 Operation" or "Remote 2-Press Unlock" is set to "ON".

  3. CHECK CHATTERING PREVENTION FUNCTION


    1. Check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. However, when the switch is operated repeatedly at 1-second intervals, check that the corresponding operation is carried out.

  4. CHECK SWITCH OPERATION FAIL-SAFE FUNCTION


    1. Check that the doors cannot be locked/unlocked when operating a switch on an unregistered electrical key transmitter sub-assembly, but that the doors can be locked/unlocked when operating a switch on the registered electrical key transmitter sub-assembly.

  5. CHECK ANSWER-BACK (HAZARD WARNING LIGHT) FUNCTION


    1. When the lock switch is pressed, check that the hazard warning lights flash once simultaneously with the locking operation of all doors.

    2. When the lock switch is pressed with any door open and then the doors are closed, check that the hazard warning lights flash once.*1

    3. When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all doors.*2

    4. When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of the driver door.*3


      • *1: Customize item "Wireless Lock Function with Doors Open" or "Wireless Lock When Door Opened" is set to "ON".

      • *2: Customize item "Unlock 2 Operation" or "Remote 2-Press Unlock" is set to "OFF".

      • *3: Customize item "Unlock 2 Operation" or "Remote 2-Press Unlock" is set to "ON".

  6. CHECK ANSWER-BACK (WIRELESS DOOR LOCK BUZZER) FUNCTION (w/ Wireless Door Lock Buzzer Answer-back Function)


    1. When the lock switch is pressed, check that the buzzer sounds once simultaneously with the locking operation of all doors.

    2. When the lock switch is pressed with any door open and then the doors are closed, check that the buzzer sounds once.*1

    3. When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of all doors.*2

    4. When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of the driver door.*3

    5. When the luggage compartment door is opened by wireless operation, the wireless door lock buzzer sounds.


      • *1: Customize item "Wireless Lock Function with Doors Open" or "Wireless Lock When Door Opened" is set to "ON".

      • *2: Customize item "Unlock 2 Operation" or "Remote 2-Press Unlock" is set to "OFF".

      • *3: Customize item "Unlock 2 Operation" or "Remote 2-Press Unlock" is set to "ON".

  7. CHECK AUTOMATIC LOCKING FUNCTION


    1. Check that the doors relock automatically as long as none of the doors have been opened or all doors have not been locked within approximately 30 seconds of all doors being unlocked by pressing the unlock switch.

    2. Check that the automatic locking function does not operate when any door has been opened within approximately 30 seconds of unlocking the doors by pressing the unlock switch.

    3. Check that the automatic locking function does not operate when all doors have been locked manually (such as using key linked operation, or by pressing the lock switch) within approximately 30 seconds of unlocking the doors by pressing the unlock switch.

  8. CHECK DOOR AJAR WARNING FUNCTION


    1. Check that the wireless door lock buzzer sounds for approximately 5 seconds when the lock switch is pressed with any of the doors ajar or open.

  9. CHECK DOOR LOCK STOP FUNCTION THAT OPERATES WHEN A DOOR IS OPEN/AJAR


    1. With a door open or ajar, check that the doors cannot be locked when the lock switch is operated.

      Tech Tips

      The doors can be unlocked even when a door is open or ajar.

  10. CHECK PANIC ALARM CONTROL FUNCTION (w/ Panic Switch)

    Click here

  11. CHECK ILLUMINATED ENTRY FUNCTION

    Click here

  12. CHECK MEMORY CALL FUNCTION

    Click here

  13. CHECK POWER WINDOW DOWN FUNCTION

    Click here