INSPECT ILLUMINATED ENTRY SYSTEM OPERATION
Tech Tips
Perform this inspection with the door switch of the map light assembly on.
Control | Condition | Lights that Operate |
---|---|---|
Actuation Area-linked | With the power switch off and all of the doors closed and locked, enter an exterior detection area while carrying an electrical key transmitter and check that the lights that operate turn on for approximately 15 seconds and then turn off. |
|
Door Lock/Unlock-linked | With the power switch off and all of the doors closed and locked, unlock either front door using an unlock operation (key-linked, wireless or entry unlock operation) and check that the lights that operate turn on for 15 seconds and then turn off. |
|
Door Open/Close-linked | With the power switch off and all of the doors closed, open either front door and check that the lights that operate turn on (IG). While the lights that operate are on, close all of the doors and check that the lights that operate turn off after approximately 15 seconds. |
|
With the power switch off and all the doors closed, open the front door and check that the blinking interval for the lights listed on the right slows down. After this, check that the blinking interval for the lights listed on the right quickens when the brake pedal is depressed. | Power switch illumination | |
With the power switch on (IG), open either front door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off. | Map light sub-assembly (front dome light) | |
Power Switch-linked | Turn the power switch from on (ACC) or on (IG) to off and check that the lights that operate turn on for approximately 15 seconds and then turn off. |
|
Turn the power switch on (ACC) or on (IG) and check that the lights that operate turn on. |
|
|
Turn the power switch from on (ACC) or on (IG) to off and check that the lights that operate turn off. |
|
|
Check that the blinking interval for the lights listed on the right slows down when the power switch is turned from on (ACC) or on (IG) to off. | Power switch illumination | |
Shift position-linked | With the power switch on (READY), move the shift lever from P to any other position and check that the lights that operate dim. While the lights that operate are on, move the shift lever to P and check that the lights that operate return to full brightness. |
|
INSPECT BATTERY SAVING CONTROL OPERATION
The operations and conditions of this control are described below.
Control | Condition | Lights that Operate |
---|---|---|
Basic operation | When 20 minutes elapse after the power switch is turned from on (ACC or IG) to off and the lights that operate remain on, the lights are turned off. Tech Tips Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.
|
|
Interior light auto cut operation | When 20 minutes elapse after the power switch is turned from on (ACC or IG) to off and the lights that operate remain on, the lights are turned off. Tech Tips Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.
|
|