ELECTRONICALLY CONTROLLED BRAKE SYSTEM, Diagnostic DTC:C1259/58, C1310/14, C1310/51

DTC Code DTC Name
C1259/58 HV System Regenerative Malfunction
C1310/14 Malfunction in HV System
C1310/51 Malfunction in HV system

DESCRIPTION

The skid control ECU assembly communicates with the hybrid vehicle control ECU assembly and controls braking force according to the regenerative force of the motor.

The skid control ECU assembly sends enhanced-VSC signals to the hybrid vehicle control ECU assembly and receives operating signals from the hybrid vehicle control ECU assembly.

The skid control ECU assembly uses CAN communication for communicating with the hybrid vehicle control ECU assembly. If a communication malfunction is detected, the skid control ECU assembly prohibits enhanced-VSC operation, brake hold operation and part of the electronically controlled brake system control as a fail-safe function.

If the signals from the hybrid vehicle control ECU assembly return to normal, the warning light will go off and the DTCs C1259/58, C1310/14 and C1310/51 will be cleared.

DTC No. Detection Item INF Code DTC Detection Condition Trouble Area Note
C1259/58 HV System Regenerative Malfunction - A regeneration malfunction signal is input for at least 0.036 seconds when IG2 terminal voltage is 9.5 V or more for at least 2 seconds and communication with the hybrid vehicle control ECU assembly is valid. Hybrid control system (Regeneration malfunction) Electronically controlled brake system DTC
C1310/14 Malfunction in HV System - The hybrid control malfunction signal is received for at least 0.072 seconds from hybrid vehicle control ECU assembly. Hybrid control system (Brake hold control malfunction) Brake hold DTC
C1310/51 Malfunction in HV system - An internal malfunction signal is input for at least 0.072 seconds when IG2 terminal voltage is 9.5 V or more for at least 0.2 seconds and communication with the hybrid vehicle control ECU assembly is valid. Hybrid control system (VSC malfunction) VSC DTC
DTC No. Brake warning light / yellow (minor malfunction) code ABS warning light code Slip indicator light code Brake hold standby indicator light code
C1259 58 - - -
C1310 - - - 14
C1310 - - 51 21

PROCEDURE


  1. CHECK HYBRID CONTROL SYSTEM


    1. Check if a hybrid control system DTC is output.

      Click here


      Powertrain > Hybrid Control > Trouble Codes
      Result
      Result Proceed to
      DTCs are not output. A
      DTCs are output. B

    A

    REPLACE HYBRID VEHICLE CONTROL ECU ASSEMBLY Click here

    B

    INSPECT HYBRID CONTROL SYSTEM Click here