HYBRID CONTROL SYSTEM, Diagnostic DTC:P060694

DTC Code DTC Name
P060694 Hybrid/EV Powertrain Control Module Processor Unexpected Operation

DTC SUMMARY


  1. MALFUNCTION DESCRIPTION

    The main CPU and sub CPU of the Hybrid vehicle control ECU assembly monitor each other.

    The cause of this malfunction may be the following:


      Hybrid vehicle control ECU assembly internal malfunction

    • Hybrid vehicle control ECU assembly malfunction

DESCRIPTION

The hybrid vehicle control ECU assembly monitors its internal operation and will store these DTCs when it detects an internal malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P060694 Control Module Processor Unexpected Operation

The main CPU value received by the sub CPU of the hybrid vehicle control ECU assembly exceeds the threshold for a certain period of time.

(1 trip detection logic)

 Hybrid vehicle control ECU assembly Comes on

Master Warning Light:

Comes on

CONFIRMATION DRIVING PATTERN

Tech Tips

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click here


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG) and turn the GTS on.

  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  4. Turn the power switch off and wait for 2 minutes or more.

  5. Turn the power switch on (IG) and turn the GTS on.

  6. Turn the power switch on (READY) and wait for 10 seconds or more.

  7. Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.

  8. Check the DTC judgment result.

    Tech Tips


    • If the judgment result shows NORMAL, the system is normal.

    • If the judgment result shows ABNORMAL, the system has a malfunction.

    • If the judgment result shows INCOMPLETE or N/A, perform the normal judgment procedure again.

PROCEDURE


  1. CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Check for DTCs.


      Powertrain > Hybrid Control > Trouble Codes
      Result
      Proceed to
      P060694 only is output.
      DTCs except P060694 are output.

    5. Turn the power switch off.


    P060694 only is output.

    REPLACE HYBRID VEHICLE CONTROL ECU ASSEMBLY Click here

    DTCs except P060694 are output.

    GO TO DTC CHART (HYBRID CONTROL SYSTEM) Click here